Add Battery Camera Steps

Power on and Enter Pairing Mode

1. Press and hold the power button for about 5 seconds until you hear a startup sound and see a blue indicator light turn on.
2. Wait for the camera to automatically enter pairing mode, indicated by a continuous 'Ding Dong Ding Dong' sound and a flashing blue light.

Note: For first-time setup, the camera should enter pairing mode automatically. If it doesn't, double-click the power button.

Connection Methods

• Bluetooth Connection (Fastest, Recommended)
• QR Code Connection (Alternative when Bluetooth is not available, fails, or for devices that do not support Bluetooth Connection)

App Setup

3. Enable Bluetooth for your phone and for the app in your phone's settings.

Note: For Android phones, enabling Bluetooth on the device is sufficient. For iOS phones, make sure to also grant the app permission to use Bluetooth.

4. Open the app.
5. Tap "Add camera now" and follow the in-app instructions to connect your camera to a Wi-Fi network.

Note: The camera only supports 2.4G Wi-Fi.

6. Once connected, name your camera and set its location for easy identification and quick filtering.

Install Camera Close to Router

7. At the end of the app setup, the app will assess the camera's Wi-Fi signal strength. Avoid locations where the signal is marked as "Low." For optimal performance, position the camera near the Wi-Fi router. Be aware that obstacles like thick walls, brickwork, ceramics, electromagnetic devices, large liquid quantities, and substantial metal objects can interfere with Wi-Fi signals. If the signal remains weak, consider upgrading your router or using a Wi-Fi extender.

Final Configurations

8. On the app's homepage, tap on the "setting" icon to set your preferences for motion detection, notifications, recordings, alarms, and any other features.

Troubleshooting