When the camera is installed upside down, the image will be flipped. In this case, you can adjust the image in the following ways:
-
Manually adjust the installation angle of the camera until a suitable monitoring viewing angle is obtained;
-
Alternatively, you can directly set the "Rotate Image" on the app (supported by some models):
-
Open the app and go to the homepage.
-
Click on the "camera settings button"
to enter [Camera Settings].
-
Click on the [Video Settings].
-
Click on the [Rotate Image] and turn on this feature.
Note: If you turn on the "Rotate Image" feature, the motion sensitivity may be affected.