Supported Wi-Fi Bands for Cameras
Some our camera models support dual-band Wi-Fi (both 2.4GHz and 5GHz). However, the majority of our cameras currently support only 2.4GHz Wi-Fi. Additionally, none of our cameras support enterprise-grade Wi-Fi networks.
Why 2.4GHz Wi-Fi Is Preferred
-
Better Range and Wall Penetration:
2.4GHz Wi-Fi has a lower frequency and longer wavelength compared to 5GHz, allowing it to travel farther and penetrate walls more effectively. This makes it more reliable for home security cameras that may be installed far from the router or across multiple rooms. -
Limitations of 5GHz Wi-Fi:
While 5GHz Wi-Fi offers faster speeds, it has shorter range and weaker penetration through obstacles. To ensure stable connectivity in more diverse home environments, most Vicohome cameras are designed to use 2.4GHz Wi-Fi.
Why Enterprise-Grade Wi-Fi Is Not Supported
Enterprise Wi-Fi typically requires advanced authentication methods, such as certificate-based security (e.g., WPA2-Enterprise or EAP-TLS). These require installing certificates and complex configurations that are not supported by our cameras. For simplicity and ease of setup, Vicohome cameras are designed to connect only to standard home Wi-Fi networks using WPA/WPA2-PSK.
Wi-Fi Setup Tips
Depending on your router configuration, here’s how to connect your camera:
-
✅ Router supports only 2.4GHz Wi-Fi:
The camera will connect directly. -
✅ Router supports both 2.4GHz and 5GHz with "Smart Connect" enabled:
If your router merges both bands under one SSID (Wi-Fi name), the camera will automatically connect to the 2.4GHz band. -
⚠️ Router supports both bands but "Smart Connect" is disabled:
Make sure to manually select and connect the camera to the 2.4GHz SSID. The camera cannot connect to the 5GHz SSID. -
❌ Router supports only 5GHz Wi-Fi:
The camera will not connect. You’ll need a router that also supports 2.4GHz Wi-Fi.
Additional Notes
-
Signal Strength Matters:
Ensure the 2.4GHz Wi-Fi signal is strong where the camera is placed. Poor signal may prevent successful connection. -
Too Many Devices on the Router:
If your router is already connected to many devices (e.g., phones, laptops), it may run out of available IP addresses, causing connection failures. Try disconnecting unused devices or restarting your router.