Quick Setup Overview
- Power on the camera
- Enter pairing mode
- Use the app to connect via camera hotspot
- Final configuration in app
Connection Methods
This camera supports:
- Camera hotspot Connection (Recommended): App transfers Wi-Fi details to the doorbell camera via the device’s hotspot (IPC_XXXXXX).
- QR Code Setup (Fallback): Use this if the device hotspot doesn’t appear.
This article focuses on the Camera hotspot connection setup method.
Step-by-Step Instructions
1. Power on the camera
- To access the power button, you need to remove the top cover of the doorbell first.
- Insert the detaching pin into the hole on the top of the doorbell, press gently, then lift and remove the top cover.
- The power button is usually located on the side of the doorbell body.
- To turn on the doorbell camera, press and hold the power button for about 5 seconds.
2. Enter Pairing Mode
2.1 First-Time Pairing
- When the device is powered on for the first time, it will automatically enter pairing mode.
- You’ll see the blue indicator light flashing and hear a repeated “Ding Dong Ding Dong” sound.
2.2 Re-Pairing (Previously Connected Device)
If the camera was previously paired, it won’t enter pairing mode automatically. To activate pairing mode manually:
- After powering on the camera, quickly double-press the power button.
- Once pairing mode is activated, the blue indicator light will start flashing and you’ll hear a repeated “Ding Dong Ding Dong” sound.
3. Connect via Camera Hotspot in the App
3.1 Enable Bluetooth
- Turn on Bluetooth in your phone’s settings.
- On Android, simply turn on Bluetooth in system settings.
- On iOS, turn on Bluetooth and make sure the app has Bluetooth permission in Settings.
3.2 Open the app
- If this is your first time adding a device, tap “Add Camera Now” on the home screen.
- If you’ve added devices before, tap the “+” icon in the upper-right corner and choose “Add a new device.”
3.3 Detect the camera
Once you're on the “Turn on the device” screen— the app will begin scanning for nearby devices via Bluetooth:
- If your camera is found, a “New device found” alert will appear with a red dot on the camera icon.
- → Tap to check the model and SN, then proceed.
- → You’ll be taken to the Wi-Fi setup screen.
- If no device is found:
- → Tap “I heard the sound” → “Next Step”
- → Select your camera model to continue.
3.4 Connect to the Camera’s Hotspot
- On the Wi-Fi setup screen, enter your 2.4GHz Wi-Fi name and password, then tap “Next Step.”
- Confirm the info in the pop-up by tapping “Confirm.”
Next, the app will display instructions saying your camera has created a temporary Wi-Fi network:
- Tap “Got it.”
- Your phone will now prompt you to join the camera’s temporary hotspot, which usually starts with “IPC_” in its name.
- → Tap “Join” to connect.
You’ll then be redirected to the “Connecting...” screen where the app begins the setup.
3.5 Use QR Code as Backup
- If your camera still doesn’t appear, tap “Other connection methods.”
- Select “Connect via QR code”, then tap “Continue”.
Use the QR code method if camera hotspot connection fails or your camera isn't detected.
4. Final Configuration
- After the camera connects successfully, then automatically jump to “Set a name and location for the device”
- Enter a name and choose a location, then tap “Next Step”
You’ll see “Device added successfully”, then:
- If you need to add more cameras, tap “Add another device” to repeat the setup process.
- If you tap “Let’s start” to go through the installation guide. On the next screen, the app will check signal quality:
- If signal is good, tap “Next Step”
- Follow each step of the on-screen installation guidance
- Tap “Finish” to complete setup
You’ll then return to the Home screen, and the device is ready to use.